Viofo A119S & CPL Filter

These arrived last week for review from Viofo. Thank you, Bill, thank you for sending over.
20170106_155421

Official product page: Viofo A119S, Viofo CPL Filter

Viofo A119S

Specifications and features list:
• Novatek 96660 chipset
• Sony Exmor IMX291 image sensor
• 2 inch TFT screen
• 135 degree viewing angle, 7G F1.6
• Resolution: 1920*1080 60fps, 1920*1080 30fps
• Support up to 128GB microSD card
• WDR
• Super Capacitor
• Supports GPS with GPS mount
• Supports CPL filter

The box


Open box
20170106_155431

Contents
20170106_155903
• A119S
• Mini USB Cable 3 meters
• Mini USB Short Cable
• 2 port USB Car Charger
• 1 x nylon string
• GPS Mount with 3M double sided tape
• 2x Non-GPS Mount with 3M double sided tape
• 5 x Cable Clip
• Spare 3M double sided tape
• Manual in English

A119S


GPS mount


Non-GPS mounts

The angled non-GPS mount is a new item with the A119S

2 port USB car charger


English manual


Initial firmware
20170106_161357

A119S now supports image rotation which means you can mount the A119S upside down
20170106_161344

Test setup using A119’s GPS mount which works with the A119S
20170106_171105

Videos:
Without CPL filter

With CPL filter

With firmware v1.01

With firmware V1.6

With firmware V1.7

Comparisons between A119 & A119S

Basically, A119 and A119S shares the same shell. A119S have a bigger lens against the A119. A119S do away with the lens horizontally adjusting which the A119 have. A119S have the grooves on the lens cover to fit on the CPL filter which prevents it from falling off.

Latest A119S firmware is released on 2017.6.22, version number is V1.7, below is the download link, or check the attachment:

A119S V1.7 Firmware

Change log:

1. Optimized the daytime and night time IQ
2. Improved WDR performance.
3. Support auto fixing hot pixel

How to update:

Please do the following to upgrade the dash cam
The firmware will be automatically deleted from Micro SD card after upgrade completed.

Use max. 32GB card formatted by camera or on computer as FAT32
Insert card in camera and connect it to computer using USB cable
Copy the FWA119S.bin on the root of the card
After FWA119S.bin is copied to the card disconnect the camera from computer
Reconnect the camera to your computer and wait few seconds until the camera restart.
The front red LED will be blinking while upgrading.

Viofo Circular Polarizing Lens Filter for A118C2 / A119 /A119S

The box


Open box
20170106_160747

CPL filter


CPL filter on the A119S

Advertisements

6 Comments

  1. Hi Jeremy,

    Thanks for the 1st review.

    Hope to understand more is there any review regarding to below question:

    1. When engine off in parking & no pwer suppiled, is the camera able to record is there any collision, certain extend of vibration and motion

    How long can video recording in this case.

    2. If we set “ON” motion detection during normal driving mode.. is there any disruption will the recording loop?

    Thanks in advance 😀

    Like

    1. 1. The A119S is using super capacitor not battery inside. So it can’t record when the engine is off. The only way to record when parked is by hardwiring the A119S to your car battery for direct power when the engine is off. This way, can use parking mode.

      2. No disruption to the loop recording. Only that the video will only record when there is movement. So if there is no movement for a minute, it will stop recording until the car moves or detects movement. Best to turn it off during normal operations.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s